Product Features
-
智能化设计2
-
实时检测2
-
统一管理2
-
定制方案2
-
平台技术2
-
续航持久2
The product is based on Fourier infrared spectroscopy technology and eliminates the cross interference of measured components through genetic iterative metrology algorithm. Can simultaneously analyze and measure a variety of non-machine and machine gas body, Precise quantitative analysis of SO, NO (NO, NO), CH, NH, HCl, CO, CO, HO, NO CH, 2 X 2 4 3 2 2 2 2 2 2 2 2C2H4, IC5, NC5, CH3OH, C2H5OH, HCHO and other components was performed. The instrument has a typical infrared spectral absorption database, which can be used to qualitatively analyze unknown gases by absorption spectra.
Fourier transform infrared spectroscopy (FTIR) uses the principle of beam splitting interference, combines the Michelson interferometer, modulation technology and computer technology, and realizes the reduction from interferogram to spectrum by Fourier transform method. FTIR technology has a wide range of applications and has obvious advantages in mobile detection or remote detection.
Fourier infrared gas analyzer is mainly used for rapid qualitative and quantitative analysis of gases, with no less than 30 quantitative components.
- Core components, independent research and development, high maintenance efficiency, low maintenance cost
- Non-destructive testing, can be used in combination with other analytical instruments
- The instrument has the characteristics of portability, fast scanning rate, wide wavelength range, etc., the structure is tight and reliable, and can be applied to long-term on-site monitoring.
- Analyzer built-in air pump direct sampling, no pre-processing such as pre-concentration, real-time analysis.
- Instruments can be highly customized to meet the diverse needs of customers.
- The analyzer host has the functions of data collection, analysis and calculation, result display, data query, storage and export.
- The instrument is configured with LAN, RS232 communication interface, and supports multiple communication protocols such as standard AK protocol.
|
Detection components |
SO2、NOx(NO、NO2) CH 、NH3、HC1、CO、 CO2 H2O. N2O C2H2、 C2H4 IC5 NC5 CH,OH、 C, H, OHH, HCHO, et al |
|
spectral coverage |
(900~5000)cm-1 |
|
scanning speed |
10 Times / second |
|
noise-signal ratio |
Better than 15,000:1 |
|
resolution ratio |
4cm |
|
range |
0~1000~10000μmol/mol |
|
Thermal temperature |
Temperature of the gas chamber and heat tracing pipe is 191℃ |
|
Filter accuracy |
The microparticle filter efficiency greater than 0.3 μ m in diameter was 99% |
|
response time |
<120s(T90) |
|
accuracy |
≤±1%F.S. |
|
repetitiveness |
<1% |
|
zero drift |
≤±2%F.S./h |
|
Metric drift |
≤±2%F.S./h |
|
communication interface |
The USB & RS232 & RS485 & LAN port |
|
back flushing |
The external nitrogen gas is blown back |
|
Sampling traffic |
(5±0.5)L/min |
|
working temperature |
-5℃~45℃ |
|
working pressure |
80kpa~106kpa |
|
Working humidity |
0~85%RH |
|
sampling pump |
built-in |
|
power |
(220±22)VAC,<100W |
|
Host size |
395mm*170mm*345mm |
|
weight |
<15kg |
- Third party testing agency
- Industrial hygiene testing
- Leak detection.
- Vehicle exhaust monitoring
- Laboratory gas detection and analysis